Fujitsu LifeBook E Series Instructions Manual page 61

3. Enter data in [Network Key].
Depending on the number of entered
characters or digits, whether the key is
an ASCII character code or a
hexadecimal code will be identified
automatically.
Use five or thirteen characters to enter
the key in the ASCII character code for-
mat. The characters that can be used as
the "network key" are as follows:
0 - 9, A - Z, _ (underscore)
Use 10 or 26 characters to enter the key
in the hexadecimal character code format.
The characters that can be used as the
"network key" in this case are as follows:
0 - 9, A - Z, a - f
For ad hoc connection
Assign the same network name to all the
personal computers to be connected.
For infrastructure connection
Assign the appropriate data according to
the type of Access Point to be accessed.
For Access Point setting, refer to the
manual of the Access Point.
4. In [Confirm network key], enter the same
data as that of [Network key].
5. Make sure that [Key index (advanced)]
is set to "1".
Any value from "1" to "4" can be assigned
to [Key index (advanced)]. Usually, how-
ever, assign "1".
W i r e l e s s L A N F u n c t i o n
9. Click the [Authentication] tab and then
verify the settings of [Enable network
access control using IEEE 802.1X].
For internal use at an organization such as
a company, when access by wireless LAN
clients is to be limited using IEEE 802.1x
authentication,
authentication for this network IEEE 802.1X]
check box.
For home use, clear the tick mark from the
[Enable authentication for this network IEEE
802.1X] check box.
For the setting method relating to IEEE
802.1x authentication, refer to the manual of
the Access Point which you are using.
10. After the setting operations have been
completed, click the [OK] button.
Processing will return to the [Wireless
Network Connection Properties] window.
11. Verify that the network name entered in
step 7 above is added in [Preferred
Networks], and then click the [OK] button.
In [Preferred Networks], register only the
desired connection settisngs.
12. Close the [Network Connection] window.
tick the [Enable
51