Table of Contents
Advertisement
NIC1: Indicates network activity on GLAN1 when flashing.
!
Power Fail: Indicates a power supply module has failed.
Information LED: Alerts operator of several states, as noted in the table below.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
Overheating
There are several possible responses if the system overheats.
Overheat Temperature Setting
Some backplanes allow the overheat temperature to be set at 45, 50, or 55 degrees
by changing a jumper setting. For more information, consult the backplane user
manual on the Supermicro website.
Information LED
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate
the server in a rack mount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
3-3
<Chapter 3: System Interface>
Description
Advertisement
Table of Contents
