Runner 125 - 200
Connect the tester positive probe to pin 4 of the
connector of the fuel pump control device, and the
negative probe to pin 3, making sure there is bat-
tery voltage as indicated in the table.
Specification
Key set to «KEY ON»
Engine revs from 0 to 200 rpm
Engine revs from 200 to 1200 rpm
Engine revs from 1200 to 2000 rpm
Engine rpm ] 2000 r.p.m.
PUMP SUPPLY
Supply to the pump for 13 seconds
Pump electrics check
Desc./Quantity
Always «OFF»
Always «ON»
0.2 seconds «ON»
9 seconds «OFF»
Always «ON»
- 115