Battery
UNDER SEAT
(6)
(3) rubber band
(4) ring
(5) negative ( ) terminal lead
4.
Remove the rubber band ( ) by releasing the ring ( ).
5.
Disconnect the negative ( ) terminal lead ( ) from the battery ( )
first, then disconnect the positive ( ) terminal lead ( ).
6.
Remove the battery.
7.
Charge the battery (see following section), unless you have been
riding regularly.
8.
Store your battery in an easy-to-reach location off the floor, in an area
protected from freezing temperature and direct sunlight.
9.
Clean the battery box after removing the battery for storage. Dry the
battery box and, if paint is missing, re-paint the area.
10.
Slow charge the battery (see following section) once every 30 days.
Installation
1.
Reinstall in the reverse order of removal.
Be sure to connect the positive ( ) terminal first, then the negative
−
( ) terminal.
2.
Check all bolts and other fasteners are secure.
Servicing Your Honda
160
(5)
−
3
−
(7)
(6) battery
(7) positive ( ) terminal lead
5
+
+
(4)
(3)
+
4
7
6