Honda TRX350TE 2006 Owner's Manual page 124

1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil filler cap ( ) and the drain plug.
4. After the oil has completely drained, reinstall the drain plug and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Fill the gear case with the recommended oil.
2.9 US oz (85 cm )
6. Remove the oil level check bolt ( ). Make sure the oil level reaches
the oil level check hole ( ).
7. Install the oil filler cap and oil level check bolt.
REAR
(4)
(3)
(1) oil drain plug
(2) oil filler cap
2
3
4
(3) oil level check bolt
(4) oil level check hole
Gear Case Oil
1
(2)
Servicing Your Honda
(1)
115