Digital Clock
Shows hour and minute while the ignition is ON ( ).
To change the display from hourmeter to digital clock, press and release
the hourmeter/digital clock select button ( ).
To adjust the time, proceed as follows:
1.
Turn the ignition switch ON ( ).
2.
To advance the hour display one unit at a time, press and release the
hour select button ( ).
To advance the hour display automatically, press and hold the hour
select button. After two seconds, the hour display will begin
advancing. Release the button when the display reaches the desired
hour.
3.
To advance the minute display one unit at a time, press and release the
minute select button ( ).
To advance the minute display automatically, press and hold the
minute select button. After two seconds, the minute display will begin
advancing. Release the button when the display reaches the desired
minute.
4.
To zero the minute display, press and hold both the hour and minute
buttons simultaneously for two seconds.
(1)
(1) hourmeter/digital clock
select button
Indicators & Displays
2
3
(2)
1
(2) hour select button
(3) minute select button
Instruments & Controls
(3)
21