Brakes
5.
Back the adjuster off three clicks, then squeeze the brake lever several
times. Spin the wheel manually to make sure the brake does not drag.
6.
Line up the inspection hole with the second adjuster and repeat steps
3
through
5
7.
Reinstall the inspection hole plug, seating it into the inspection hole as
shown.
8.
Follow steps
9.
Recheck the brake lever freeplay. If freeplay is still excessive after
adjusting the brake lining clearance, there is probably air in the brake
system and it must be bled out. See your Honda dealer for this service.
Servicing Your Honda
140
.
3
through
7
to adjust the other front brake.