Securing Your Child In The Child Restraint - Evenflo Tribute Owner's Manual

1
To change the harness strap position, loosen the
shoulder harness, as shown on page 43, step 2. Slide the
harness strap off of the splitter plate
do this one side at a time.
2
WARNING
3
Make sure both harness straps are installed
completely on the splitter plate, as shown.
Failure to properly attach the harness straps to the
splitter plate may result in a loose harness and serious
injury or death to your child.
Infant
D
Infant
There are two positions on the harness straps. The top
loop is for infant use. The bottom loop
E
as your child grows. Reattach the harness strap onto the
splitter plate . Repeat on the other side.
D
40
D
. We suggest you
D
Pull harness strap
through to the front
of the child restraint.
Thread each harness
strap through the
appropriate slot in the
seat shell and the pad.
Pull the harness strap
to the back of the child
restraint.
Child
E
D
Child
is for use
F
4 Make sure Harness Adjust Strap
over the Harness Strap
1
Place baby in the child restraint.
bottom should be flat against the restraint.
a gap, the baby will not be comfortable.
2
Slide each harness strap
over the child's shoulders.
F
.
H
G
H
Securing Your Child in the Child
The baby's back and
Insert the buckle tongues into
the buckle. Pull up on the
harness strap to ensure the
buckle tongues are engaged.
is routed
G
Restraint
If there is
41