Removing The Board To Board Connector; Removing And Replacing The Lcd Screen - Motorola W230 Service Manual
Dual band wireless telephone; level 1-2 service manual
Hide thumbs
Also See for W230:
- User manual (82 pages) ,
- Service manual (37 pages) ,
- Getting to know manual (9 pages)
Table of Contents
Advertisement
Removing the board to board connector
Removing and Replacing the LCD Screen
25
1.
Removing the board to board connector.
Figure 21.
1.
Remove the antenna module as described earlier.
2.
Gently pry the LCD screen away from the Transceiver board. Six hooks hold it in place
(three on each side).
Figure 22. Pry the LCD screen away from the Transceiver board
3.
Detach the cable connecting the LCD screen to the Transceiver board.
4.
To replace it, gently solder the cable to the Transceiver board then mount the LCD.
5.
Restore the antenna module and other parts.
May 30, 2008
W230/W388/W216/W231
Advertisement
Table of Contents
Troubleshooting
