Table of Contents
Advertisement
REMOVING AND REINSTALLING THE MAIN PARTS
How to Remove the DVD/CD lid motor
(See Fig. 19-1 and 19-2)
1. Remove the front panel.
(Refer to the disassembly method on pages 15 and 16.)
2. Remove the screws (A1) x 5 pcs.
3. Remove the CD lid gear unit from the front panel.
4. Remove the screws (A2) x 2 pcs. to remove the CD lid
motor.
Caution:
Be careful not to damage the gear.
(If the gear is damaged, noise is heard when searching.)
(A1)x5
ø3x10mm
Figure 19-1
1-BIT SECTION
Fix the wires with nylon bands as shown.
DVD/CD Lid
Panel
Gear Box Ass'y
WIRING PROCESS DIAGRAM
Figure 19-4
Gear Box Ass'y
DVD/CD Lid
Motor
– 19 –
SD-AT100H
(A2)x2
ø2x4mm
Figure 19-2
Advertisement
Table of Contents
