Removing And Reinstalling The Main Parts - Sharp CD-DVD500 Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1 to 8 and 10 of the disassembly method to
remove the tape mechanism.
How to remove the record/playback and erase
heads (TAPE 2) (See Fig. 15-1)
1. When you remove the screws (A1) x 2 pcs., the recording/
playback head and three-dimensional head of the erasing
head can be removed.
How to remove the playback head (TAPE 1)
(See Fig. 15-2)
1. When you remove the screws (B1) x 2 pcs., the playback
head.
How to remove the pinch roller (TAPE 1/2)
(See Fig. 15-3)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (C1) x 1 pc., in the
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (TAPE 2)
(See Fig. 15-4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
How to remove the belt (TAPE 1)
(See Fig. 15-4)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
How to remove the motor (See Fig. 15-5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
(F1) x2
Ø 2.6 x 5mm
Figure 15-5
Motor
Clutch Ass'y
Erase Head
(A1)x2
Ø2 x 9mm
(B1)x2
Ø2 x 9mm
Pinch Roller
(C1)x1
FF/REW
TAPE 2
Belt
(D2)x1
Main Belt
(D1)x1
– 15 –
CD-DVD500
TAPE 2
Clutch Ass'y
Record/Playback
Head
Figure 15-1
TAPE 1
Clutch Ass'y
Playback
Head
Figure 15-2
Pinch
Roller
Pawl
<A>
Pull
<B>
Figure 15-3
Motor
TAPE 2
Main Belt
(D1)x1
Main Belt
(E1)x1
Figure 15-4
Motor
TAPE 1
Main Belt
(E1)x1
TAPE 1
FF/REW
Belt
(E2)x1