Table of Contents
Advertisement
1. Shipment Test Mode
Outline:
Initialization of EEPROM in the DVD unit
Function:
The unit is set to "Shipment". (The state immediately after shipment)
- All the functions and conditions are initialized.
- Clear all of tuner preset memory
- Clock initialization
- Clearing DVD memory
- Resetting DVD memory
- Initialization of DVD mechanism
- Set the DVD mechanism as above.
Operation: When the unit enters the shipment test mode.
1. "TEST" flashes at the top of the FL, and "INITIAL" at the bottom.
2. When initialization is complete, "COMPLETE" appears in the FL before the unit exits the test mode, and then the
power is turned off. If initialization fails, "INT ERR" appears in FL, and the unit stands by until the POWER key
ispressed.
"INITIAL" display
I
N
"COMPLETE" display
C
O
I
T
I
M
P
L
A
L
E
T
E
– 23 –
SD-AT100H
Advertisement
Table of Contents
