Mount into the
dashboard
•
If the car does not have an on-
board drive or navigation computer,
disconnect the negative terminal of
the car battery.
•
If the car battery is not
disconnected, to avoid short-circuit,
make sure that the bare wires do
not touch each other.
1
Make sure that the car dashboard
opening is within these
measurements:
2
Remove the mounting sleeve with
the supplied disassembly tools.
EN
8
3
Install the sleeve into the
dashboard and bend the tabs
outward to fix the sleeve.
1 8
3 m
4
Slide the unit into the sleeve until
you hear a "click".
m