Page 1
Always there to help you Register your product and get support at www.philips.com/welcome CE135BT/10 Question? Contact Philips User manual Manual del usuario Manual do utilizador...
Contents 1 Safety 11 Reset the system 2 Your car audio system 12 Product information Introduction Product Information What's in the box Overview of the system 13 Troubleshooting 3 Install the car audio system 14 Notice Connect wires Compliance Mount into the dashboard Care of the environment Attach the front panel Trademark notice...
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
2 Your car audio DRM protected WMA files (.wav, .m4a, .m4p, .mp4, and .aac) system WMA files in lossless format What's in the box Introduction Check and identify the contents of the package: With this system, you can: • enjoy audio from USB storage devices, SD/ SDHC card, and other external players, and Bluetooth device.
Overview of the system t s r q l k j i h • Connect to a USB storage device. • Unlock the front panel. f AUDIO IN • Connect to the audio output socket • For .wma and .mp3 tracks, press to (usually the headphone socket) of an select the previous folder.
Page 6
• In radio mode, press and hold to store • In radio mode, press and hold to store the current radio station at channel the current radio station at channel No. 6. No. 1. • For .wma and .mp3 tracks, press to access the track list.
3 Install the car • Press to enable or disable the audio system maximum volume. • Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. Caution • • Press to hang up a call. Use the controls only as stated in this user manual. •...
Yellow strip To the +12V car Connect wires battery which is energized at all Note times • Make sure that all loose leads are insulated with electrical tape. Connect the antenna and amplifier as • Consult a professional to connect wires as instructed illustrated, if applicable.
Mount into the dashboard • If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. • If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other.
Reconnect the negative terminal of the car Detach the front panel battery. Note Attach the front panel • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the Insert the notch on the front panel to the system is turned off.
For the first time use Select a tuner region Press to turn on the system. You can select a radio region that matches your » [PHILIPS] is displayed and the device location. turns to radio mode automatically. Press and hold to access the system menu.
Store radio stations automatically Enable the RDS function Switch the source to [RADIO]. Note Press BAND, , or repeatedly to select • The RDS function is enabled by default. a band. • Only when the RDS function is enabled, RDS related settings can be accessed.
6 Play from a If the play does not start, press storage device Button Function Press repeatedly to select a folder. Pause or resume play. Press to play the previous or next track. Press and hold to rewind a track or search forward fast.
» [WAIT] is displayed with -, --, and --- blinking alternately until [DISCNN OK] scrolls. Note • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device with this system, read its user • You can also complete the disconnection on your manual for Bluetooth compatibility.
Pick up an incoming call • You can also complete the reconnection on your When the system receives an incoming call, the device. phone number or [PHONE IN] is displayed. Press to answer the call. Play audio from a Bluetooth Reject an incoming call device Press and hold...
8 Listen to an 9 Charge your external device USB device You can use the system to amplify the audio You can charge your USB device, for example, input from an external device, for example, smart phone, with this product. MP3 player.
10 Adjust sound 11 Reset the system The following operations are applicable to all supported media. If the system works abnormally, reset the Button Function system to factory default settings. Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status.
12 Product Usable sensitivity - 30 µV AM(MW) (S/N = information 20 dB) Bluetooth Note Output Class 2 power • Product information is subject to change without prior Frequency 2.4000 GHz - 2.4835 GHz ISM notice. band Band Range 3 meters(free space) Standard Bluetooth 2.0 specification Product Information...
If the problem remains • WMA files in Lossless format unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
Need help?
Do you have a question about the CE135BT/10 and is the answer not in the manual?
Questions and answers