Related Manuals for Philips CE162
Summary of Contents for Philips CE162
-
Page 1: User Manual
Always there to help you Register your product and get support at www.philips.com/support CE162 Question? Contact Philips User manual... -
Page 3: Table Of Contents
Contents 1 Safety 8 Listen to an external player 2 Your car audio system 9 Adjust sound Introduction What's in the box 10 Enjoy features with AppsControl Overview of the system application 3 Install the car audio system Check the Bluetooth connection status 19 Connect wires Use the AppsControl application Mount into the dashboard... -
Page 4: Safety
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. in hazardous radiation of EMC or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only. -
Page 5: Your Car Audio System
Sampling frequencies: 44.1 kHz, 48 kHz Bitrates: 64-192 kbps and variable bitrates ID3 tag V2.0 or later Congratulations on your purchase, and support that Philips offers, register your product at www.philips.com/welcome. .m4p, .mp4, and .aac) Introduction What's in the box... -
Page 6: Overview Of The System
Overview of the system Tune to a radio station. Unlock the front panel. Press to skip to the previous/next track. Press and hold to rewind a track or For .wma and .mp3 tracks on a storage search fast forward. device, press to select the previous folder. Press and hold to access the system Press to answer or redial a call. - Page 7 Press to turn on the system. In radio mode, press to select the preset radio station of No. 1 and 2. Press and hold to turn off the system. In radio mode, press and hold to store Press to mute or restore sound. the current radio station at channel No.
-
Page 8: Install The Car Audio System
3 Install the car Connect wires audio system Note Make sure that all loose leads are insulated with electrical tape. Consult a professional to connect wires as instructed Caution below. Use the controls only as stated in this user manual. Check the car's wiring carefully and Always follow the instructions in this chapter in connect them to the the ISO male... -
Page 9: Mount Into The Dashboard
Mount into the dashboard illustrated, if applicable. If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other. -
Page 10: Attach The Front Panel
Install the sleeve into the dashboard and Attach the trim plate. Reconnect the negative terminal of the car battery. Slide the unit into the sleeve until you hear a "click". Attach the front panel Insert the notch on the front panel to the chassis on the main unit. -
Page 11: Get Started
Press to turn on the system. Press to release the front panel. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] Pull the front panel outwards to remove it. (select a radio region) scrolls. When one of the following options is... -
Page 12: Set The Clock
Press repeatedly to select a listening Set the clock zone. Press and hold to access the system menu. Mute the button beep Press repeatedly until [CLK] is displayed with time digits blinking. The beep sound of buttons is enabled by default. -
Page 13: Listen To Radio
5 Listen to radio Search for a radio station Search for a radio station automatically Select a tuner region Press to search for the previous or next radio station with strong signals. You can select a radio region that matches your location. -
Page 14: Play With Rds
Press to access the list of program Store radio stations manually types. Rotate to select a program type, and Press repeatedly to select a tuner then press band. Tune to the radio station that you want to Item Program Description store. - Page 15 Use alternate frequencies If the signal of an RDS station is poor, enable to switch the system to the previous mode. the AF (Alternate Frequency) function to search for another station that broadcasts the same program. Synchronize the system clock Press and hold to access the system menu.
-
Page 16: Play From A Storage Device
6 Play from a Control play storage device Button Function Press repeatedly to select a folder. Pause or resume play. Press to play the previous or next are copied onto a compatible storage device. track. Press and hold to rewind a track or search forward fast. -
Page 17: Use Bluetooth Devices
Enter the default password "0000", and » If the pairing succeeds, [PAIRED] is displayed on the LCD screen of this system. Enable or permit the connection with CE162. » If the connection succeeds, [CONNECTED] scrolls and displayed on the LCD screen of this system. -
Page 18: Play Audio From A Bluetooth Device
Disconnect a device Play audio from a Bluetooth device Press and hold to access the system menu. If the connected Bluetooth device supports Press / repeatedly until [DISCONNECT] is displayed. you can listen to tracks that are stored on the device through the system. -
Page 19: Listen To An External Player
8 Listen to an Redial the last called number external player Press . » [REDIAL] is displayed. Press » [CALLING] is displayed. You can use the system to amplify the audio input from an external player, for example, MP3 player. Pick up an incoming call When the system receives an incoming call, the phone number or [PHONE IN] is displayed. -
Page 20: Adjust Sound
Enable the Bluetooth function of your Rotate to adjust the setting. smartphone and search for Bluetooth devices that can be paired. In the device list, select CE162. Enter the default password "0000", and » When connection is successful, displays on the CE162 screen. -
Page 21: Check The Bluetooth Connection Status
Launch the AppsControl app and it will Use the AppsControl automatically connect with the car audio system. application » When connection is successful, [Connected Ok] is displayed. Note To enjoy the latest features, update the application on your phone when an update message prompts. After update, the interface and features may be different from the description in this section. -
Page 22: Additional Information
11 Additional (External audio input): Switch the source to the AUDIO IN. information (USB): Switch the source to USB storage device. (SD card):Switch the source to SDHC card. (Bluetooth): Enable/Disable the Bluetooth function on your Dimmer smartphone (For Android only). (Voice): Voice control (For Android only). -
Page 23: Charge Your Usb Device
Charge your USB device Replace the fuse You can charge your USB device, for example, If there is no power, check the fuse and replace smart phone, with this product. it if it is damaged. Check the electric connection. Note Remove the damaged fuse from the rear panel. -
Page 24: Product Information
If the problem remains Power supply 12 V DC (11 V - 16 V), unsolved, go to the Philips Web page (www. negative ground philips.com/support). When you contact the Fuse 15 A... -
Page 25: About The Bluetooth Device
Portable Document Format (PDF) version of the user manual at www. The Bluetooth function of the device is philips.com/support. not enabled. Refer to the user manual of function. The system is not in the pairing mode. -
Page 26: Trademark Notice
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Environmental information All unnecessary packaging has been omitted. - Page 28 Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.