Table of Contents
Advertisement
3
Features
C
O Incoming Call Information Log
Description
Conditions
Connection References
Programming References
If the display digital proprietary telephone (KX-T7230 or KX-
T7235) user cannot answer a call, the telephone automatically
records the caller's telephone number, name and the time. The user
can call back the caller by checking the call log. This is available if
such a telephone receives incoming outside calls from the ISDN
line provided with the CLIP (Calling Line Identification
Presentation) feature. A maximum of 15 calls per telephone can
be logged.
• The call log is registered at the time DPT finishes ringing. If a call is
directed to multiple DPTs, the call log is registered at the DPT that has
the smallest jack number of the ringing DPTs.
• Transferred call information is also recorded.
• If the DPT is in Call Forwarding – No Answer or IRNA is activated,
the call log is registered at the original DPT but not at the destination
DPT unless the destination party answers the call and record it
manually.
• When the information area is full (i.e. more than 15 calls), the user can
control the log mode at his / her extension (CO Incoming Call
Information Log Mode). If the user sets this mode, new CO incoming
call information is retained but old data is discarded. If the user cancels
this mode, new CO incoming call information is not entered in the unit.
To set or cancel the mode, a corresponding feature number is used.
• The telephone user can lock the display of the unit so that CO
incoming call information is not shown on the display. A lock code is
required to set or cancel this feature. Operator can cancel the lock in
case the user forgets the lock code.
Section 2, Installation,
2.4 Installation of Optional Cards and Units (in this manual)
Section 4, System Programming,
[001] System Speed Dialing Number Set — in this manual
[002] System Speed Dialing Name Set — in this manual
[100] Flexible Numbering, CO incoming call information log mode/CO
incoming call information log lock — in this manual
[417] CO Line Name Assignment — in this manual
[418] ISDN Line Number Assignment — in this manual
[419] ISDN Outgoing CLIR Service Assignment — in this manual
C
13
Advertisement
Table of Contents
