Dell Alienware AW2518H User Manual page 34

ULMB ULMB (Ultra Low Motion Blur) helps have less of a motion
blur effect while you are watching fast-moving images. When
the graphics card supports G-SYNC, make sure that the
Enable G-SYNC function is not selected in the NVIDIA
Control Panel, ULMB will be automatically enabled.
NOTE: This function is available when the refresh rate is
100 Hz, 120 Hz or 144 Hz.
NOTE: When ULMB is enabled, the message of ULMB Mode
is displayed on the lower-left corner of the OSD. When G-
SYNC is enabled in the NVIDIA Control Panel, the message
of G-SYNC Mode is displayed instead. If your system doesn't
support G-SYNC, then the message of Normal Mode is
displayed.
ULMB Pulse Allows you to adjust the panel's backlight a bit, so as to reduce
Width
motion blur. Use or to adjust the level from 10 to 100.
Smaller values decrease motion blur and brightness.
Dark Stabilizer The feature improves the visibility in the dark gaming
scenarios. The higher the value (between 0 to 3), the better
visibility in dark area of the display image.
Reset Game Select this option to restore default game settings.
34 | Operating the Monitor