Advertisement

Quick Links

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
Dell Alienware
AW2724DM
o cerca il tuo prodotto tra le
migliori offerte di Monitor
Service Manual–AW2724DMB
Version: 01
Date:2023/03/06
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Alienware AW2724DMB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dell Alienware AW2724DMB

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Dell Alienware AW2724DM o cerca il tuo prodotto tra le migliori offerte di Monitor Service Manual–AW2724DMB Version: 01 Date:2023/03/06 - 1 -...
  • Page 2: Table Of Contents

    Content Index 1. General Safety Instructions ..................3  1.1 SAFETY: General Safety ..................3  1.2 SAFETY: General Power Safety ................5  2. Exploded view diagram with list of items ..............6  3. Wiring connectivity diagram ..................8  4. How to connect and disconnect power cable/ connectivity cable ......9  5.
  • Page 3: General Safety Instructions

    IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety...
  • Page 4: Protecting Against Electrostatic Discharge

    When operating your equipment:  Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement. Do not use AC powered equipment during an electrical storm. Battery powered devices may ...
  • Page 5: Safety: General Power Safety

    If your equipment uses an AC adapter:  Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion.  NOTE: Refer to your system rating label for information on the proper adapter model approved for use with your device.
  • Page 6: Exploded View Diagram With List Of Items

    2. Exploded view diagram with list of items Item Description Q'ty Remark ASSY BKT CHIN Panel MID FRAME BTN POWER PCBA LENS HOLDER L PCBA SENSOR BD PCBA KEY BD For EMEA Only, not for PCBA USB BD other regions PCBA I/F BD PCBA SPS BD ASSY MAIN SHD...
  • Page 7 NOTE: For replacement of power cord, connectivity cable and external power supply (if applicable), contact Dell: 1. Go to https://www.dell.com/support. 2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom-right corner of the page.
  • Page 8: Wiring Connectivity Diagram

    3. Wiring connectivity diagram Wire2 Wire 3 Wire1 Wire 4 FFC 4 FFC 1 FFC 2 FFC 3 - 8 -...
  • Page 9: How To Connect And Disconnect Power Cable/ Connectivity Cable

    4. How to connect and disconnect power cable/ connectivity cable WARNING: To change power cable/ connectivity cable, switch off power before unplugging the cable and replugging in required cable. Connect/ disconnecting the DisplayPort (DP to DP) and USB cables Connect/ disconnecting the DisplayPort (USB-C to DP) and USB cables - 9 -...
  • Page 10 Connect/ disconnecting the HDMI and USB cables (optional) Connect/ disconnecting the power cables of your computer and monitor into a wall outlet - 10 -...
  • Page 11: Disassembly And Assembly Procedures

    5. Disassembly and Assembly Procedures NOTE: This “Disassembly and Assembly Procedures” is for EMEA only, not for other regions. Please note that Dell will deem warranty void if any disassembly is done on the monitors. 5.1 Disassembly SOP Preparation before disassembly 1.
  • Page 12: Operation

    Item Picture Operation Tool Notes 1. Unlock 4 screws on Philips-head Rear Cover screwdriver (Screw 2. Use hands or scraper Torque: bar to disassemble 8-10 Kgf ) “Rear Cover” from monitor Scraper bar Notice the disassembly order: Top Side=> Right / Left Side =>Bottom Side Tear off conductive cloth tape from Main...
  • Page 13 Item Picture Operation Tool Notes 1. Tear off a tape from Thermal Sensor BD FFC “LENS BD FFC” and (FFC 4P P1 570MM THER) “Thermal Sensor BD FFC” on Panel LENS BD FFC 2. Unplug “Thermal Sensor BD FFC” from I/F BD and tear off it from Panel 3.
  • Page 14 Item Picture Operation Tool Notes 1. Disassemble “MYLAR Philips-head PWR” from Main screwdriver (Screw Torque: 8.5±1 Kgf) 2. Unlock 7 PCBA screws 3. Tear off an acetate tape and a yellow tape from “FFC EDP” on I/F BD, then, unplug “FFC EDP” from I/F BD - 14 -...
  • Page 15 Item Picture Operation Tool Notes 4. Disassemble I/F BD Philips-head Do not touch from Main SHD and screwdriver component unplug “SPS BD to IF without BD Wire” from I/F BD (Screw wearing Torque: insulating 8.5±1 Kgf) gloves 5. Disassemble SPS when BD from Main SHD disassembli...
  • Page 16: Assembly Sop

    5.2 Assembly SOP Preparation before assembly 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment, materials as bellow: 1) Working table 2) Philips-head screwdriver 3) Gloves 4) Cleaning cloth 5) ESD protection Item Picture Operation...
  • Page 17 Item Picture Operation Tool Notes Caution: Philips- Please make sure that “FFC EDP cable don’t head touch the pin marked in red before pasting an screwdriver acetate tape to prevent from piercing “FFC EDP. (Screw Torque: 8.5±1 Kgf) 5. Lock 7 PCBA screws 6.
  • Page 18 Item Picture Operation Tool Notes 1. Insert “FFC EDP” to Philips- panel head screwdriver 2. Paste an acetate tape and a yellow (Screw tape to fix “FFC EDP” Torque- on panel SHD to panel: 4.0±0.5 kgf) 3. Place Main SHD on Panel and lock 2 screws to fix it on Panel...
  • Page 19 Item Picture Operation Tool Notes 1. Insert “FFC USB3 KEY BD to I/F BD FFC 30/30” to I/F BD (FFC 4P P1 210MM JOYSTICK) 2. Insert “KEY BD to I/F BD FFC” to I/F BD 1. Tear off the release Philips- paper from head...
  • Page 20 Item Picture Operation Tool Notes To assemble stand: 1. Align and place the stand riser on the stand base. 2. Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly Close the screw handle.
  • Page 21: Trouble Shooting Instructions

    6. Trouble shooting instructions - 21 -...
  • Page 22 - 22 -...
  • Page 23 - 23 -...
  • Page 24 - 24 -...
  • Page 25 - 25 -...
  • Page 26 - 26 -...
  • Page 27 - 27 -...
  • Page 28 - 28 -...
  • Page 29 - 29 -...

This manual is also suitable for:

Alienware aw2724dm

Table of Contents