Download Print this page
Dell AW2724HFB Disassembly
Dell AW2724HFB Disassembly

Dell AW2724HFB Disassembly

Advertisement

Quick Links

 
DELL AW2724HFB
1. Disassembly Procedures
Turn off the monitor.
S1
Place the monitor on a soft cloth or
S2
cushion
Press and hold the stand release button
at the back of the display
Lift the stand assembly up and away
S3
from the monitor
Unlock 4 screws on Rear Cover
S4
Use hands or scraper bar to
disassemble "Rear Cover" from monitor
Notice the disassembly order:
Top Side=> Right / Left Side =>Bottom
Side
(Screw Torque: 8-10 kgf)
1
 
Unplug "FFC USB3 30/30" from USB
S5
BD
Unlock 2 screws on USB BD
Disassemble USB BD from Middle
Frame
(Screw Torque: 4.5±0.5kgf)
Tear off a gasket from USB BD
S6
Tear off a tape from "LENS BD FFC"
S7
and "KEY BD to I/F BD FFC" on Panel
Unplug "LENS BD FFC" from I/F BD
and tear off it from Panel
Unplug "KEY BD to I/F BD FFC" from
I/F BD and tear off it from Panel

Advertisement

loading
Need help?

Need help?

Do you have a question about the AW2724HFB and is the answer not in the manual?

Questions and answers

Summary of Contents for Dell AW2724HFB

  • Page 1   DELL AW2724HFB 1. Disassembly Procedures Unplug “FFC USB3 30/30” from USB Turn off the monitor. Place the monitor on a soft cloth or Unlock 2 screws on USB BD cushion Disassemble USB BD from Middle Press and hold the stand release button...
  • Page 2 DELL AW2724HFB   Tear off 3 tapes from the backlight wire Tear off a yellow tape from “FFC EDP on panel (See blue mark) 51P/51P” on panel Unplug “Backlight Wire” from “LED DRV Unplug “FFC EDP 51P/51P” from panel BD” (See red mark), then, disassemble it from the hooks on the upper left of Take off “Main SHD”...
  • Page 3   DELL AW2724HFB Tear off an acetate tape from the Unlock 2 screws to disassemble “LENS connector of backlight on panel BD” from “BTN POWER” Tear off 2 acetate tapes from two convex hulls at the bottom of the panel Unplug “Backlight Wire”...
  • Page 4 DELL AW2724HFB   Unlock 2 screws to disassemble “Key Tear off 2 acetate tapes from “SPS BD BD” from “HOLDER L” Wire” and “USB B BD to I/F BD wire” on Main SHD Take off “Key BD” from “HOLDER L”...
  • Page 5   DELL AW2724HFB Unplug “FFC USB3 30/30” from “USB B Unlock 1 ground screw and BD” disassemble “WIRE AC+3P” from Main Unplug “LED DRV BD to I/F BD Wire” and “USB B BD to I/F BD wire” from I/F (Screw Torque: 8.5±1 kgf) Disassemble SPS BD from Main SHD and unplug “WIRE AC+3P”...
  • Page 6 DELL AW2724HFB   Remove electrolyte capacitors (red mark) from printed circuit boards S29-1 Cut the glue between bulk cap. and PCB with a knife S29-2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
  • Page 7   DELL AW2724HFB S29-3 Take out bulk cap. pin solder with soldering iron and absorber S29-4 Lift the bulk cap. up and away from the PCB...
  • Page 8 DELL AW2724HFB   2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT)