How To Connect Analog Audio Components For Five Or Six Channels - McIntosh MX120 Owner's Manual

How to Connect Audio Components for five
or six channels
The MX120 accepts Analog Audio and Digital Audio Sig-
nals. It is important to connect the Analog Outputs along
with the Digital Audio Signal Output from source compo-
nents to the MX120. This will assure the audio from the
source component is available to the REC Outputs and
Zone B Outputs.
1. Connect unbalanced cables from the MX120 ZONE A
OUTPUTS FL (Front Left), CTR (Front Center), FR
(Front Right), LS (Left Surround), RS (Right Sur-
round) to the McIntosh Five Channel Power Amplifier
making sure to match the channel identifications.
2. Connect a cable from the MX120 Tuner Analog Audio
INPUTS (Input 0) to the Tuner 1 Outputs (Fixed) of the
McIntosh AM/FM Tuner.
3. Connect a cable from the MX120 Analog Audio DVD
INPUT (Input 5) to the McIntosh 2 CH Audio Outputs
of the McIntosh Audio/Video Player.
4. Connect balanced cables from the MX120 BALanced
VCR
IN OUT
16
How to Connect Audio Components for five or six channels
Satellite
Receiver
McIntosh Audio Video Player
INPUT to the McIntosh Balanced Audio Outputs of the
McIntosh Audio/Video Player.
5. Connect cables from the MX120 EXTERNAL Audio
INPUTs to the McIntosh 5.1CH Audio Outputs of the
McIntosh Audio/Video Player.
6. Connect a cable from the MX120 Analog Audio SAT
INPUT (Input 3) to the Analog Audio Outputs of the
Satellite Receiver.
7. Connect a cable from the MX120 Analog Audio REC
OUTPUTS to the VCR Audio Input.
8. Connect a cable from the MX120 Analog Audio VCR
INPUT (Input 6) to the VCR Audio Outputs.
9. Connect a cable from the MX120 Analog Audio PH/
AUX INPUT (Input 1) to the Digital Audio Recorder
Analog Output.
10. Connect a cable from the MX120 ZONE A SUBwoofer
OUTPUT to the McIntosh Powered Subwoofer Line In
Jack.
McIntosh AM/FM Tuner
McIntosh Five Channel Power Amplifier
McIntosh
Powered Subwoofer