How To Connect Audio Components - McIntosh MA6300 Owner's Manual

How to Connect Audio Components

1. Connect a Balanced Audio Cable from the McIn-
tosh SACD/CD Player Audio Outputs to the
MA6300 CD1 INPUTS.
Note: The unbalanced Audio Outputs from the McIn-
tosh CD Player connected to the CD2 INPUTS
may be used instead of the Balanced CD1
Inputs.
2. Connect an Audio Cable from a McIntosh Tuner 1
Fixed Outputs to the MA6300 TUNER INPUTS.
3. Connect an Audio Cable from a Turntable to the
PHONO INPUTS and the Turntable Ground Con-
nection to the GND grounding post.
4. Connect an Audio Cable from the MA6300 TAPE
OUTS to the Record Inputs of a Recorder and
from the MA6300 TAPE INPUTS to the Recorder
Outputs.
5. Connect any remaining Source Components in a
similar manner.
McIntosh SACD/CD Player
Recorder
OUT IN
How to Connect Audio Components
McIntosh Tuner
Turntable
9