High Speed Recording; Normal Recording And Listening - Philips FW-R7 User Manual

INTERNAL RECORDING
STANDBY
ON
CD 1
CD 2
CD 3
FW - R7
DISPLAY

High speed recording

High speed recording of an entire disc, a track, a
program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc you wish
to record from.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate JOG CONTROL to select one of the following high
speed recording modes:
If a disc from the CD changer is selected:
: for high speed recording of an entire disc
y
• Continue with step 5.
: for high speed recording of a track
y
• Press YES to confirm.
• Rotate JOG CONTROL to select the track.
and the track number is displayed.
y
• Continue with step 6.
If CD changer program mode is available:
: for high speed recording of the selected
y
disc or of the program
If CD changer track edit mode is available:
: for high speed recording of the A–B track
y
18
AN ALO G
DIG ITA L /
AU X
TU NE R
OR
iR SE NS
S/ TA
NE W
RD S
E
K/ TI M
I SYS TEM CL OC
BLE MIN I HIF XT
CD TE
CD REC OR DA
LO SE
OP EN /C
5 Press YES to confirm your selection.
Both decks will be selected in the display, the arrow
y
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either (or , ) ,
is displayed.
Note: When the CDR(W) already contains a recording, ALC
will also become active and
6 Press YES to start high speed recording.
The arrow lights,
y
RECORDING IN PROGRESS
speed recording starts and the actual recording time left
starts to count down.
• To stop recording press STOP & on the set.

Normal recording and listening

Normal recording and listening of an entire disc, a
track, a program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Follow steps 2 and 3 of "High speed recording".
3 Rotate JOG CONTROL to select one of the following normal
record options:
If CD changer is selected:
: for listening to the entire disc during
y
normal recording
: for listening to the track during
y
normal recording
• Press YES to confirm.
• Rotate JOG CONTROL to select the desired track.
y and the track number is displayed.
• Continue with step 6 of "High speed recording".
If CD changer program mode is available:
: for listening to the program during
y
normal recording
If CD changer track edit mode is available:
: for listening to the A–B track during
y
normal recording
4 Follow steps 5 and 6 of "High speed recording".
• To stop recording press STOP & on the set.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
or
will be shown.
ALC
is shown, high