External Recording; Analogue Or Digital Recording; Recording With Automatic Start - Philips FW-R7 User Manual

EXTERNAL RECORDING

STANDBY
ON
CD 1
CD 2
CD 3
FW - R7
DISPLAY

Analogue or digital recording?

When making recordings from an external source, we
recommend to do analogue recording only if digital recording
is not possible. Digital recording will usually result in better
sound quality.

Recording with automatic start

Recording of an entire disc or a track with automatic start
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press repeatedly DIGITAL / ANALOG AUX to select the
input for the external source you want to record from.
is displayed if the digital input is selected.
y
is displayed if the analogue input is
y
selected.
3 Press REC TYPE on the set to enter the recording menu.
4 Rotate JOG CONTROL to select either:
: for recording with synchronised start of an
y
entire disc
: for recording with synchronised start of
y
a track
5 Press YES to confirm your selection.
,
y
time of the CDR(W) are displayed.
20
AN ALO G
DIG ITA L /
AU X
TU NE R
OR
iR SE NS
S/ TA
NE W
RD S
K/ TI M E
CL OC
I SYS TEM
BLE MIN I HIF XT
CD TE
CD REC OR DA
LO SE
OP EN /C
and the remaining recording
6 Start playback on the selected source.
The CD recorder starts to record simultaneously and
y
is shown. The remaining
RECORDING IN PROGRESS
recording time on the CDR(W) is displayed.
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track
or after 2.7 seconds of silence in analogue recordings.
7 If a digital source is selected:
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
If an analogue source is selected:
At the end of the recording process, the CD recorder stops
after a silence of 20 seconds on the source material.
• To stop recording manually, press STOP & on the set.
goes off.
y
RECORDING IN PROGRESS
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.