Sound Control; Demo Mode - Philips FW-R7 User Manual

Sound control

Volume adjustment
• Adjust the volume by using MASTER VOLUME
(-VOLUME/+on the remote control).
The volume level in (decibel) is displayed.
y
DSC
Digital Sound Control enables you to select different preset
sound settings.
• Press DSC repeatedly to select the desired sound
characteristics.
, ,
y
Incredible Surround
Stereo sound is determined by the distance between the front
speakers. Incredible Surround enables you to enjoy an incredibly
wide stereo effect, regardless of the speakers' distance.
• Press INCREDIBLE SURROUND (INCREDIBLE SURROUND on
the remote control) to switch the surround sound effect
either on or off.
is shown and
y
INCREDIBLE SURROUND
is displayed if the surround sound effect is on.
Note: The effect of Incredible Surround may vary with
different types of music.
PURE
• Press PURE repeatedly to switch the DSC settings either on
or off.
is shown and
y
PURE
are switched off.
LOUDNESS
• Press LOUDNESS to switch loudness either on or off.
is shown and
y
LOUDNESS
loudness is on.
, , , .
is displayed if the DSC settings
is displayed if
BASIC FUNCTIONS
MUTE
This feature allows you to temporarily switch off the sound
without switching off the set.
1 Press MUTE on the remote control to switch off the sound.
is displayed and playback/recording will be
y
continued without sound.
2 Press MUTE on the remote control again to switch on the
sound again.
Speaker balance
It is possible to adjust the relative volume balance between
the connected front speakers.
• Press L BALANCE or R BALANCE on the remote control to
adjust the relative volume of the left or right front speaker.
(or ) and the actual volume of the left
y
(or right) front speaker are displayed.
When the volume of both speakers is balanced,
y
is displayed.

Demo mode

The demo mode displays various features of the set and will
start automatically.
• If any source key is pressed:
The set switches to the selected source.
y
If y STANDBY ON is pressed:
y The set switches to standby. After a few seconds, the
demonstration will start again.
Cancelling the demo mode
• Keep STOP & on the set pressed for at least 3 seconds to
cancel the demo mode.
The demo mode is cancelled permanently. The set
y
switches to standby. A few seconds later the set
switches to an economy power save mode.
13