Internal Recording; Recording Modes; High Speed Recording And Automatic Finalizing - Philips FW-R8 User Manual

Recording modes

For internal recordings you can record from the internal
CD changer or tuner. You can choose from the following
recording modes:

– High speed recording and automatic finalizing:

Fast and easy! Record and finalize your CDR(W) in one
quick step while the sound is muted. You can record the
current CD or a program from the CD changer.
– High speed recording:
Record your CDR(W) fast while the sound is muted.
You can record an entire CD, a track, a program or a track
edit from the CD changer.
– Normal recording and listening:
Listen to the recording while you are making it.
You can record an entire CD, a track, a program or a track
edit from the CD changer.
– Manual recording:
Start and stop your recording manually whilst listening to
it. You can do either microphone recordings or radio
recordings from the FM tuner.
High speed recording and automatic finalizing
High speed recording and automatic finalizing of the
current disc
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press CD™CD on the set to enter the recording mode.
Both decks will be selected in the display, the arrow
y
starts blinking. The remaining recording time of the
CDR(W), the total playing time of the source CD and
(or , ) are displayed.
3 Press YES to start recording and finalizing.
The arrow lights,
y
RECORDING IN PROGRESS
speed recording and finalizing start and the actual
recording time left starts to count down.
Note: If a program was already available before pressing
CD™CD, this will be ignored.
current disc will be recorded. After finishing the recording,
is shown and the program is available again.
PROG
is shown, high
goes off and the
PROG

INTERNAL RECORDING

High speed recording and automatic finalizing
(optional) of the current program
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press COMPILE CD on the set to enter the record mode.
Both decks will be selected in the display, the arrow
y
starts blinking. The remaining recording time of the
CDR(W), the total playing time of the source CD and
are displayed.
3 Press either:
YES to confirm,
or
NO to change the program.
starts blinking. Now you can change the program
y
PROG
(see "Program") and return to the record mode by
pressing COMPILE CD.
4 is displayed.
Press either:
YES, if the CDR(W) is to be finalized after recording,
or
NO, if the CDR(W) is not to be finalized after recording.
The arrow lights,
y
RECORDING IN PROGRESS
speed recording and finalizing (if selected) start and the
actual recording time left starts to count down.
Note: If no program is available and you press COMPILE CD,
you enter immediately into the program menu. Start
your programming and return to the record mode by
pressing PROGRAM or COMPILE CD.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
is shown, high
17