Cassette Recorder; Cassette Playback; Cassette Recording - Philips MAGNAVOX AZ2407 Owner's Manual

CASSETTE RECORDER
CASSETTE PLAYBACK
7.
Press STOP®OPEN ■ to open the cassette holder.
2. Insert a recorded cassette and shut the cassette holder.
3. Press PLAY
►
and playback will start.
4. For brief interruptions, press PAUSE II. Press PAUSE II again to
resume playback.
5.
By pressing
◄◄
or ►>, fast winding of the tape is possible in
both directions.
6. To stop playback, press ST0P*0PEN ■.
—
The keys are automatically released at the end of the tape,
except if PAUSE
11
has been activated.
7. To switch off the set, press the POWER button.
Note: During CD playback or TUNER mode, if the cassette holder
is already loaded you can switch directly to the TAPE mode
by pressing the PLAY ► key.
CASSETTE RECORDING
General information on cassette recording
- Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
- This deck is not suited for recording on CHROME (IEC n) or
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
- The recording level is set automatically. Altering the VOLUME,
INCREDIBLE SURROUND or DSC controls will not affect the
recording in progress.
- No recording will take place during the first 7 seconds, when
the leader tape passes the recorder heads.
- To prevent the accidental erasure of a recording, keep the
cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible. To
render this safeguard ineffective, cover the tabs with a piece
of adhesive tape.
• As long as PLAY ► or RECORD • keys are pressed on the set,
it will not be possible to change to another source.
15