HPE FlexFabric 7900 Series Security Configuration Manual page 20

No. Attribute
45 Acct-Authentic
60 CHAP-Challenge
61 NAS-Port-Type
79 EAP-Message
Message-Authenticato
80
r
87 NAS-Port-Id
HPE proprietary RADIUS subattributes
No. Subattribute
1 Input-Peak-Rate
2 Input-Average-Rate
3 Input-Basic-Rate
4 Output-Peak-Rate
5 Output-Average-Rate
6 Output-Basic-Rate
15 Remanent_Volume
20 Command
Description
•
7—Accounting-On. (Defined in the 3rd Generation Partnership
Project.)
•
8—Accounting-Off. (Defined in the 3rd Generation Partnership
Project.)
•
9 to 14—Reserved for tunnel accounting.
•
15—Reserved for failed.
Authentication method used by the user. Possible values include:
•
1—RADIUS.
•
2—Local.
•
3—Remote.
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.
Type of the physical port of the NAS that is authenticating the user.
Possible values include:
•
15—Ethernet.
•
16—Any type of ADSL.
•
17—Cable. (With cable for cable TV.)
•
19—WLAN-IEEE 802.11.
•
201—VLAN.
•
202—ATM.
If the port is an ATM or Ethernet one and VLANs are implemented on it,
the value of this attribute is 201.
Used to encapsulate EAP packets to allow RADIUS to support EAP
authentication.
Used for authentication and verification of authentication packets to
prevent spoofing Access-Requests. This attribute is present when EAP
authentication is used.
String for describing the port of the NAS that is authenticating the user.
Description
Peak rate in the direction from the user to the NAS, in bps.
Average rate in the direction from the user to the NAS, in bps.
Basic rate in the direction from the user to the NAS, in bps.
Peak rate in the direction from the NAS to the user, in bps.
Average rate in the direction from the NAS to the user, in bps.
Basic rate in the direction from the NAS to the user, in bps.
Total remaining available traffic for the connection, in different units for
different server types.
Operation for the session, used for session control. Possible values
include:
•
1—Trigger-Request.
•
2—Terminate-Request.
•
3—SetPolicy.
•
4—Result.
•
5—PortalClear.
12