Configuring A Static Ipv4Sg Binding - HPE FlexFabric 7900 Series Security Configuration Manual

Hide thumbs Also See for FlexFabric 7900 Series:
Table of Contents

Advertisement

Step
2.
Enter interface view.
3.
Enable the IPv4SG feature.

Configuring a static IPv4SG binding

You can configure global static and interface-specific static IPv4SG bindings.
Global static bindings take effect on all interfaces.
Interface-specific static bindings take priority over global static bindings. An interface first uses the
static bindings on the interface to match packets. If no match is found, the interface uses the global
bindings.
Configuring a global static IPv4SG binding
Step
1.
Enter system view.
2.
Configure a global
static IPv4SG
binding.
Configuring a static IPv4SG binding on an interface
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure a static
IPv4SG binding.
Command
interface interface-type
interface-number
ip verify source { ip-address |
ip-address mac-address |
mac-address }
Command
system-view
ip source binding ip-address ip-address
mac-address mac-address
Command
system-view
interface interface-type
interface-number
ip source binding
{ ip-address ip-address |
ip-address ip-address
mac-address mac-address |
mac-address mac-address }
[ vlan vlan-id ]
180
Remarks
The following interface types are
supported:
Layer 2 Ethernet interface.
Layer 3 Ethernet interface.
VLAN interface.
By default, the feature is disabled
on an interface.
If you configure this command on
an interface multiple times, the
most recent configuration takes
effect.
Remarks
N/A
No global static IPv4SG
binding exists.
Remarks
N/A
The following interface types are
supported:
Layer 2 Ethernet interface.
Layer 3 Ethernet interface.
VLAN interface.
By default, no static IPv4SG binding is
configured on an interface.
The vlan vlan-id option is supported only in
Layer 2 Ethernet interface view.
To configure a static IPv4SG binding for
the ARP detection function, the vlan
vlan-id option must be specified, and ARP
detection must be enabled for the specified
VLAN.
You can configure the same static IPv4SG
binding on different interfaces.

Advertisement

Table of Contents
loading

Table of Contents