Ike Security Mechanism - HPE FlexFabric 7900 Series Security Configuration Manual

Figure 31 IKE exchange process in main mode
As shown in
messages:
•
SA exchange—Used for negotiating the IKE security policy.
•
Key exchange—Used for exchanging the DH public value and other values, such as the
random number. The two peers use the exchanged data to generate key data and use the
encryption key and authentication key to ensure the security of IP packets.
•
ID and authentication data exchange—Used for identity authentication.
The main difference between the main mode and the aggressive mode is that the aggressive mode
does not provide identity information protection and exchanges only three messages, rather than
three pairs. The main mode provides identity information protection but is slower.

IKE security mechanism

IKE has a series of self-protection mechanisms and supports secure identity authentication, key
distribution, and IPsec SA establishment on insecure networks.
Identity authentication
The IKE identity authentication mechanism is used to authenticate the identity of the communicating
peers. The device supports the following identity authentication methods:
•
Pre-shared key authentication—Two communicating peers use the pre-configured shared
key for identity authentication.
•
RSA signature authentication and DSA signature authentication—Two communicating
peers use the digital certificates issued by the CA for identity authentication.
The pre-shared key authentication method does not require certificates and is easy to configure. It is
usually deployed in small networks.
The signature authentication methods provide higher security and are usually deployed in networks
with the headquarters and branches. When deployed in a network with many branches, a signature
authentication method can simplify the configuration because only one PKI domain is required. If you
use the pre-shared key authentication method, you must configure a pre-shared key for each branch
on the headquarters node.
Figure 31, the main mode of IKE negotiation in phase 1 involves three pairs of
126