Enabling The Stelnet Server; Enabling The Sftp Server; Enabling The Scp Server; Configuring Netconf Over Ssh - HPE FlexFabric 7900 Series Security Configuration Manual

Enabling the Stelnet server

After you enable the Stelnet server on the device, a client can log in to the device through Stelnet.
To enable the Stelnet server:
Step
1. Enter system view.
2. Enable the Stelnet server.

Enabling the SFTP server

After you enable the SFTP server on the device, a client can log in to the device through SFTP.
When acting as an SFTP server, the device does not support SFTP connections initiated by SSH1
clients.
To enable the SFTP server:
Step
1. Enter system view.
2. Enable the SFTP server.

Enabling the SCP server

After you enable the SCP server on the device, a client can log in to the device through SCP.
When acting as an SCP server, the device does not support SCP connections initiated by SSH1
clients.
To enable the SCP server:
Step
1. Enter system view.
2. Enable the SCP server.

Configuring NETCONF over SSH

This feature allows users to use a client to perform NETCONF operations on the device through a
NETCONF-over-SSH connection.
When acting as a server in the NETCONF-over-SSH connection, the device does not support
connection requests initiated by SSH1 clients.
For more information about NETCONF over SSH commands, see Network Management and
Monitoring Command Reference.
To configure NETCONF over SSH:
Command
system-view
ssh server enable
Command
system-view
sftp server enable
Command
system-view
scp server enable
147
Remarks
N/A
By default, the Stelnet server is
disabled.
Remarks
N/A
By default, the SFTP server is
disabled.
Remarks
N/A
By default, the SCP server is
disabled.