Walchem WebMaster ONE Instruction Manual page 13

Relay Output Menu – Target PPM Feed with Feed Verification
Makeup Conductivity
Unit Volume to Trigger Output
Target PPM Set Point
Specific Gravity of Chemical Fed
Output Time Limit
Hand Time Limit
4-20 mA Output Menu - Retransmit
(parameter selected) = 4 mA
(parameter selected) = 20 mA
Full Scale Ranges are:
Contacting Conductivity:
Electrodeless Conductivity:
Or
Or
Temperature:
pH:
ORP:
Chlorine, Chlorine Dioxide
4-20 mA Output Menu – Proportional Feed
Set Point
Minimum Output
Input Value when Output is Max
Damping
Interlock Value
Input Fault Value
Input Cal Set Value
Output Time Limit
Hand Time Limit
Hand Value
Full Scale Ranges are:
Contacting Conductivity:
Electrodeless Conductivity:
Or
Or
Temperature:
pH:
ORP:
Chlorine, Chlorine Dioxide
Data Logging Menu
Logging Interval
Full scale range of the parameter
1 to 999,999,999 (units defined by user)
0 to 100,000 ppm
0 to 10.000 g/ml
0 = , 1 to 1440 minutes
1 to 1440 minutes
Full scale range of the parameter
Full scale range of the parameter
0 to 10,000 μS/cm
50 to 10,000 μS/cm
10 mS/cm to 100 mS/cm
100 mS/cm to 1000 mS/cm
32 to 392°F (-18 to 200° C)
-2 to 16 standard units
-1400 to 1400 mV
0 to 10 mg/l
Full scale range of the parameter
Allowed 0 – 100%
Full scale range of the parameter
0 – 60 seconds
0 – 100%
0 – 100%
0 – 100%
0 = , 1 to 1440 minutes
1 to 1440 minutes
0 – 100%
0 to 10,000 μS/cm
50 to 10,000 μS/cm
10 mS/cm to 100 mS/cm
100 mS/cm to 1000 mS/cm
32 to 392°F (-18 to 200° C)
-2 to 16 standard units
-1400 to 1400 mV
0 to 10 mg/l
10 to 1440 minutes
9