Walchem WebMaster ONE Instruction Manual page 10

Sensor Input Menu – if Chlorine or Chlorine Dioxide
Calibration Reminder
Alarm Limits
Alarm Dead Band
Deviation from Primary Sensor
Damping
Flowmeter Input Menu – Analog Input Type
Flow Rate at 4 mA
Flow Rate at 20 mA
Level Input Menu – Analog Input Type
Empty mA
Full mA
Full volume
Low Level Alarm Limit
Generic 4-20 mA Input Menu
Parameter = 4 mA
Parameter = 20 mA
Low Alarm Limit
High Alarm Limit
Flowmeter Input Menu – Digital Input Type
Volume per Contact
K Factor
Total Alarm Limit
Rate High Alarm
Rate Low Alarm
Feed Verification Input Menu
Alarm Time
Pump Volume per Stroke
Counter Input Menu
One Count =
Total Alarm Limit
Rate High Alarm
Rate Low Alarm
Relay Output Menu – On/Off Set Point
Set Point
Dead Band
Output Time Limit
Hand Time Limit
0-365 days
0 to 10 mg/l
0 to 10 mg/l
0.01 to 10 mg/l
0 to 60 seconds
0 to 1000 (units of measure defined by user)
0 to 1000 (units of measure defined by user)
0 to 20 mA
0 to 20 mA
0 to 10,000 (units defined by user)
0.001 to 10,000 (units defined by user)
-10,000 to 10,000 (units defined by user)
-10,000 to 10,000 (units defined by user)
-100,000,000 to 100,000,000 (units defined by user)
-100,000,000 to 100,000,000 (units defined by user)
0 to 1000 (units of measure defined by user)
0.001 to 20,000 (Pulses per Gallon or Liter)
0 = no limit, otherwise >0
>0
>0
0.1 to 10 minutes
0.000 to 100 (units of measure defined by user)
>0
0 =no limit, otherwise >0
>0
>0
Full scale range of the input parameter
Full scale range of the input parameter
0 = , 1 to 1440 minutes
1 to 1440 minutes
6