Fluke 712B User Manual page 39

-200 to 100
100 Ω
Pt(3916)
100 to 630
-200 to 100
100 Ω
Pt(3926)
100 to 630
10 Ω
-100 to 260
Cu(427)
120 Ω
-80 to 260
Ni(672)
50 Ω
-180 to 200
Cu(427)
100 Ω
-180 to 200
Cu(427)
YSI400 15 to 50
1) Sensor inaccuracies not included.
Resolution: 0.1 °C.
2)
Read accuracy is based on 4-wire input. For 3-wire RTD measurements, assuming all three RTD leads are matched, add 1.0 °C (Pt10 and Cu10),
3)
0.6 °C (Pt50 and Cu50), 0.4 °C (Other RTD types) to the specifications.
4) Source Accuracy in source mode is based on 0.5 mA~3 mA (1.00 Ω~400.00 Ω), 0.05 mA~0.8 mA (400.0 Ω~1500.0 Ω), 0.05 mA~0.4 mA (1500.0 Ω
~4000.0 Ω), excitation current (0.25 mA for Pt1000 range).
Temperature Coefficient: ±0.05 °C /°C for measure, ± 0.05 °C /°C (<18 °C or >28 °C) for source.
5)
6) Supports pulsed transmitters and PLCs with pulse times as short as 5 ms.
0.2 °C 0.4 °C
0.015 %+0.18 °C 0.03 %+0.36 °C
0.2 °C 0.4 °C
0.015 %+0.18 °C 0.03 %+0.36 °C
1.5 3
0.15 0.3
0.4 0.7
0.2 0.4
0.2 0.4
0.2 °C
1 mA
0.015 %+0.18 °C
0.2 °C
1 mA
0.015 %+0.18 °C
1 mA 1.5
1 mA 0.15
1 mA 0.4
1 mA 0.2
250 μA 0.2
RTD Calibrator
Specifications
0.4 °C
0.03 %+0.36 °C
0.4 °C
0.03 %+0.36 °C
3
0.3
0.7
0.4
0.4
31