Manage Pre-Installed Certificates For Cucm Via Expressway Provisioning - Cisco SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Manage pre-installed certificates for CUCM via Expressway provisioning

Sign in to the web interface, navigate to
Authorities, and open the Preinstalled CAs
View or disable certificates
Use the Details... and Disable
buttons respectively, to view or
disable certificates.
D15330.06 SX10 Administrator Guide CE9.1, JUNE 2017.
Configuration Configuration
Security > Certificate
tab.
The certificates and certificate issuers in the illustration are examples. Your system has other certificates.
As an alternative to using the pre-installed certificates, you
can append the certificates you need to the certificate list
manually.
Refer to the ► Manage the list of trusted certificate
authorities (CAs) chapter how to update the list of trusted
certificates.
Peripherals Maintenance
26
Administrator Guide
System settings
About pre-installed
certificates
The pre-installed certificates in this
list are only used when the video
system is provisioned by Cisco Unified
Communications Manager (CUCM) via
Expressway (Edge).
Only Cisco Expressway infrastructure
certificates are checked against this list.
If the validation of the Cisco Expressway
infrastructure certificate fails, the video
system will not be provisioned and
registered.
Factory resetting the video system
does not delete the list of pre-installed
certificates.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Appendices