Furuno CHS-5LMARK-2-55 Operator's Manual page 86

FURUNO
2.5 Unit
2.6 Audio search
2.7 Features
3 HULL UNIT
3.1 XDCR travel
3.2 Raising/lowering time
3.3 Driving system
3.4 Allowable ship's speed
4 INTERFACE
4.1 Port number
Serial
E/S
Speed log
Gyrocompass
External KP
External audio
Video signal
4.2 I/O sentences
Input
Output
4.3 CIF data input
5 POWER SUPPLY
5.1 Processor unit
CSH-5L MARK-2
CSH-8L MARK-2
5.2 DC/AC Inverter (TR-2451, option)
6 ENVIRONMENTAL CONDITION
6.1 Ambient temperature
6.2 Relative humidity
6.3 Degree of protection
Processor/ control unit
Others
6.4 Vibration
7 UNIT COLOR
7.1 Processor unit
7.2 Transceiver/hull unit
7.3 Control unit
Current speed and direction (5 layer)
Meter, feet, fathom, P/B
±10°, ±20°, ±40° and ±60°
Interference rejecter, Afterglow, Noise limiter, Numeric indication
Automatic tilt scanning, over-voltage warning,
Unretracted transducer warning
400 mm or 600 mm, selectable
400 mm: 14 s, 600 mm: 20 s
Remote electric control
18 kn max. (16 kn during raise/lower operation)
2 ports, NMEA 0183 Ver1.5/2.0/2.2
1 port, Sonde/ sounder, VI-1100A applicable
1 port, contact closure, 200/400 pulse/NM
1 port, AD converter AD-100
1 port, Current loop, 0 to 12V
1 port, 2 W, 50 ohm, 3.5 mm pin-plug
2 ports, RGB analog, separated synchronization, XGA (VESA)
1024 x 768, 65.0 MHz, Dsub-15P-female
CUR, DBS, DBT, DPT, GGA*, GLC, GLL*, GTD, HDG, HDM, HDT,
MTW, RMA, RMC, VDR, VHW, VTG
(*: disabled for NMEA0183 V1.5)
TLL
Location, Ship's speed, Bearing, Current data (1 layer),
Water depth, Water temperature, Multiple layer current data
100/115/200/220/240 VAC: 4.0-2.0 A, 1 phase, 50-60 Hz
100/115/200/220/240 VAC: 4.5-2.2 A, 1 phase, 50-60 Hz
24 VDC
0°C to +50°C
95% or less at 40°C
IPX2 (w/o connector panel of processor unit)
IPX0
IEC 60945 Ed.4
2.5GY5/1.5
2.5G7/2
N3.0
SP - 2
CSH-5L/8L MARK-2
E1350S01B-M