Furuno CHS-5LMARK-2-55 Operator's Manual page 5

CAUTION CAUTION
Do not exceed 18 knots with the
transducer lowered and do not
exceed 15 knots when lowering or
raising the transducer.
The transducer may become damaged.
Turn off the POWER switch on the
hull unit before manually raising or
lowering the transducer (with the
ratchet wrench).
Bodily injury may result if the ratchet
wrench rotates unexpectedly, because
the raise/lower motor may start up.
The zinc block attached near the
transducer must be replaced yearly.
The junction between the transducer
and main shaft may corrode, which can
result in loss of the transducer or water
leakage iinside the ship.
SAFETY INSTRUCTIONS
WARNING LABEL
A warning label is attached to all units
of the system. Do not remove any label.
If a label is missing or damaged, contact
a FURUNO agent or dealer about
replacement.
Name: Warning Label (1)
Type: 86-003-1011-1
Code No.: 100-236-231
iii