Disassembly Procedure - Yamaha Clavinova CLP-265GP Service Manual

■ DISASSEMBLY PROCEDURE

1. Music Rest Assembly
(Time required: About 1 minute)
1-1 Remove the four (4) screws marked [S13]. The music
rest assembly can then be removed. (Fig.1)
[S12]
[S13]
Music Rest Assembly
Top Board Assembly (S)
[S12]: Bind Head Screw 4.0X14 MFZN2B3 (WE983100)
[S13]: Bind Head Tapping Screw-1 3.0X16 MFZN2B3 (WE971200)
(Fig.1)
Hinge Shafts
Top Board Assembly (L)
Support Bar Assembly
[S12]
[S13]
Key Cover Assembly
Top Board Assembly (L)
[S14]: Bind Head Screw 5.0X50 MFZN2B3 (WJ346900)
[S23]: Bind Head Tapping Screw-1 3.5X16 MFZN2B3 (WE955100)
[S25]: Nut Hex Cap #3 M5 MFZN2B3 (WJ347000)
(Fig.3)
2. Top Board Assembly (L)
(Time required: About 3 minutes)
2-1 Remove the two (2) hinge shafts. The top board
assembly (L) can then be removed. (Fig.2, Fig.3)
3. Top Board Assembly (S)
(Time required: About 5 minutes)
* Before disassembling the top board assembly (S), shut up
the key cover assembly completely to protect the key
cover assembly from being scratched.
3-1 Remove the top board assembly (L) . (See procedure 2.)
3-2 Remove the two (2) screws marked [S12]. (Fig.1)
3-3 Slide the top board assembly (S) forward and lift it.
Removal of the hinge shaft
Remove the two (2) hinge
shafts one by one.
(Fig.2)
Support Bar Assembly
[S23]
Support Bar Angle Assembly
CLP-265GP
Hinge Shafts
[S14]
[S25]
5