Yamaha Clavinova CLP-265GP Service Manual page 12

CLP-265GP
18. Speaker Grille Assembly, Partition Assembly C
(Time required: About 7 minutes)
* Before disassembling the speaker grille assembly and the
partition assembly C, surely remove the top board
assembly (L) and the support bar assembly.
18-1 Remove the top board assembly (L). (See procedure 2.)
18-2 Remove the support bar assembly. (See procedure 17.)
18-3 Remove the two (2) screws marked [S23]. The support
bar angle assembly can then be removed. (Fig.3)
18-4 Remove the speaker grille assembly. (Fig.17)
* The speaker grille assembly is fixed by the five (5) dual
lock fasteners. (Fig.17)
18-5 Remove the eleven (11) screws marked [S18]. The
partition assembly C can then be removed. (Fig.17)
[S18]
[S18]
[S18]
12
[S20] Speaker (Woofer)
[S18]
[S18]
Dual Lock Fastener
[S18]: Truss Head Screw 4.0X16 MFZN2W3 (WF355900)
[S20]: Bind Head Tapping Screw-1 4.0X16 MFZN2W3 (WF109500)
Speaker (Tweeter)
[14c]: Bind Head Tapping Screw-B 4.0X8 MFZN2W3 (WE974600)
19. Speaker (Woofer)
(Time required: About 8 minutes each)
19-1 Remove the top board assembly (L). (See procedure 2.)
19-2 Remove the support bar assembly. (See procedure 17.)
19-3 Remove the speaker grille assembly. (See procedure 18.)
* The speakers (Woofers) are fixed on the partition
assembly C.
19-4 Remove the four (4) screws marked [S20]. The speaker
(woofer) can then be removed. (Fig.17)
* The left and right speakers (woofers) can be removed in
the same manner.
Speaker Grille Assembly
Partition Assembly C
[S18]
[S18]
(Fig.17)
Top Board Assembly (S)
[14c]
(Fig.18)
[S20]
[S18]
[S18]
Speaker (Tweeter)