Details Of Vmc Commands - Sony PVM-740 Interface Manual For Programmers

SDCP (UDP) communication sequence
The following diagram shows the communication
sequence for ALL and Group-mode SDCP (UDP)
communication:
Controller
Request STATset
Request STATset
Request STATget

Details of VMC Commands

VMC category
The following table lists the VMC command categories:
List of command categories
Category Communication
direction
"STATset" Controller to
monitor
"STATget" Controller to
monitor
"STATret" Monitor to
controller
"INFOknob" Controller to
monitor
"INFObutton" Controller to
monitor
Monitor
Unusable
Description
Sets the status of the
monitor.
Requests the monitor to
send its status back to the
controller.
Response to "STATget".
Notifies the monitor the
status of the rotary switch.
Transmits inputs from
multipurpose buttons such
as the numeric keypad and
the cursor to the monitor.
9
VMC Command Description