Download  Print this page

Sony PVM-740 Interface Manual For Programmers Page 10

Professional video monitor.
Hide thumbs

Advertisement

Command
Enter the setting value in [Value] (do not enter [ ].)
Function
Command Name
SDCP (Ethernet
Button CONTROL
Command) V0.2
Input Config
Control Data
Display Data
I/P Mode
Select Offset
On Switch Function
Off Switch Function
10
VMC Command Description
Command
INFObutton MENU
INFObutton MENUUP
INFObutton MENUDOWN
INFObutton MENUENT
STATset INPUTSEL CVBS
STATset INPUTSEL SDI
STATset INPUTSEL HDMI
STATset WBSEL LOW
STATset WBSEL HIGH
STATset WBSEL USER
STATset CONTRAST [Value]
STATset APERTURE [Value]
STATset BRIGHTNESS [Value]
STATset PHASE [Value]
STATset CHROMA [Value]
STATset VOLUME [Value]
STATset RESET
STATset SHIFTH [Value]
STATset SHIFTV [Value]
STATset MODE0
STATset MODE1
STATset MODE2
STATset NTSC0
STATset NTSC75
STATset RGB RANGE FULL
STATset RGB RANGE LIMITED
STATset REMOTE ON
STATset POWERSAVING ON
STATset KEYINHIBIT ON
STATset TALLYGREEN ON
STATset TALLYRED ON
STATset HVDELAY ON
STATset BLUEONLY ON
STATset MONOCHR ON
STATset CAMERA FOCUS ON
STATset LED ON
STATset SCREENSAVER ON
STATset SILENTMODE ON
STATset FLIPH ON
STATset FLIPV ON
STATset FLIPHV ON
STATset REMOTE OFF
STATset POWERSAVING OFF
Send (Ethernet t Monitor)
Display/non-display the menu.
Moves the menu item upward.
Moves the menu item downward.
Confirms the menu item.
Selects the composite input.
Selects the SDI input.
Selects the HDMI input.
Selects COLOR TEMP D65.
Selects COLOR TEMP D93.
Selects COLOR TEMP USER.
Sets the contrast level.
Adjustable range is 0 to 100.
Sets the aperture level.
Adjustable range is 0 to 6.
Sets the brightness level.
Adjustable range is 0 to 100.
Sets the phase level.
Adjustable range is 0 to 100.
Sets the chroma level.
Adjustable range is 0 to 100.
Sets the volume level.
Adjustable range is 0 to 100.
Resets the setting to the factory setting.
Sets the H shift.
Adjustable range is +30 to -30.
Sets the V shift.
Adjustable range is +30 to -30.
Sets I/P MODE to INTER-FIELD.
Sets I/P MODE to FIELD MERGE.
Sets I/P MODE to LINE DOUBLER.
Sets the NTSC setup level to 0.
Sets the NTSC setup level to 7.5.
Sets RGB RANGE to FULL.
Sets RGB RANGE to LIMITED.
Sets the remote to ON.
Sets POWER SAVING to ON.
Sets KEY INHIBIT to ON.
Sets the tally green to ON.
Sets the tally red to ON.
Sets the H/V delay function to ON.
Sets BLUE ONLY to ON.
Sets MONO to ON.
Sets the camera focus function to ON.
Sets the front panel LED to ON.
Sets SCREEN SAVER to ON.
Sets SILENT MODE to ON.
Sets FLIP H to ON.
Sets FLIP V to ON.
Sets FLIP HV to ON.
Sets the remote to OFF.
Sets POWER SAVING to OFF.

Advertisement

Table of Contents

   Related Manuals for Sony PVM-740

This manual is also suitable for:

Pvm-2541Pvm-1741

Comments to this Manuals

Symbols: 0
Latest comments: