This unit can control the monitor using the commands
described in this manual via the network (Ethernet). For
example, the Input Select, Power On/Off, etc. can
control from the external controller such as the PC.
This document uses the following notations:
• A hexadecimal number is indicated by an h after the
number (10h = 0x10 = 16.) Otherwise, the number is
• Character strings are enclosed by quotation marks
When you connect the unit to the network that uses the
Ethernet, use the straight cable. When using a hub for
network connection, use a hub with automatic cable type
(straight or cross) detection feature (AUTO MDIX).
Network ports used by the monitor (the FTP
data port is not shown)
Overview / Connections