Advertisement
Regular care & maintenance
As needed: Change dome (E)
ReSound standard domes
1. Push the new dome over the
receiver.
2. Make sure that the new dome is
properly and securely maintained.
1
ReSound tulip domes
Tulip domes consist of two "petals". It
is important that the largest petal is
the outermost petal. To ensure this:
from
1. Push the largest petal away from
1
incorrect
the receiver tube using a finger.
This bends the petal forward.
dome is
2. Then push the largest "petal"
back, and it will be placed on top
of the smaller petal.
Monthly: Change the wax guard or
see your hearing care professional.
For changing CeruSTOP
wax guards, complete the following
steps:
Removal: Insert the removal side
of the wax guard tool into the used
wax guard so that the shaft of the
2
Insertion: To insert the new wax
2
guard, gently press the replacement
side of the wax guard tool straight
into the hole of the sound outlet
until the outer ring lies flush with the
outside of the receiver. Pull the tool
20-05-2015 11:48:59
straight out. The new wax guard will
remain in place.
tool is touching the rim of the
wax guard. Slowly pull the wax
guard straight out.
Wax guard tool
removal side
(white)
™
replacement side
Advertisement
