909 T12 Series Manual page 9

Table of Contents

Advertisement

• Store battery pack in well ventilated, dry and cool conditions, and
avoid direct sunlight and rain.
6). SERVICING
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
power tools is maintained.
SAFETY WARNINGS FOR CORDLESS DRILLS
• Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
• Hold power tools by insulated gripping surface ,when performing
an operation where the cutting accessory or fastener may contact
hidden wiring. Cutting accessory and fasteners contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
• Use appropriate detectors to determine if utility lines are hidden in
the work area or call the local utility company for assistance. Contact
with electric lines can lead to fire and electric shock. Damaging
a gas line can lead to ecplosion.Penetraing a water line causes
property damage or may cause an electric shock.
• Switch off the power tool immediately when the tool inserts jams. Be
prepared for high reaction torque that can cause kickback. The tool
inserts jams when:
- the power tool is subject to overload or
- it becomes wedged in the workpiece.
• Hold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
• Secure the workpiece. A workpiece clamped with clamping devices
or in a vice is held more secure than by hand.
• Keep your workplace clean. Blends of materials are particularly
dangerous.Dist from light alloys can burn or explode.
• Do not open the battery. Danger of short-circuiting.
• In case of damage and improper use of the battery, vapours may
be emitted Provide for fresh air and seek medical help in case of
complaints. The vapours can irritate the respiratory system.
• Use the battery only in conjunction with this power tool. This
measure alone protects the battery against dangerous overload.
Touch_IM_ED8.indd 9
• Use only original 909 batteries with the voltage listed on the
nameplate of your power tool. When using other batteries, e.g,
imitations, reconditioned batteries or other brands, there is danger of
injury as well as property damage through exploding batteries.
ADDITIONAL INSTRUCTIONS FOR WORK WITH
THE BATTERY/CHARGER
WARNING:
If the battery pack is cracked or damaged
in any other way, do not insert it in the charger. There is a
danger of electric shock.
WARNING:
Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock.
• Before using the charger, read all the instructions and cautionary
markings on the charger and battery pack as well as the instructions
on using the battery pack.
• Keep the charger away from rain or damp. Water entering into the
charger will increase the risk of an electrical shock,
• Only use chargers recommended by the manufacturer to recharge
the battery. When using a charger designated for a particular type of
battery, there is a risk of fire if it is used with other batteries.
• Never use to recharge third-party batteries. The charger is only
designed to charge the supplied batteries (Li-Ion) using the voltages
specified in the Technical Data. Otherwise there is a risk of fire or
explosion.
• Keep the charger clean. Contamination will increase the risk of an
electrical shock.
• Check the charger, cable and plug each time you use the unit. Do
not use the charger if you find any damages. Never open the charger
up yourself, have it repaired by a qualified specialist only and with
original replacement parts. A damaged charger, cable or plug will
increase the risk of an electrical shock.
• Never operate the charger on a surface that will burn easily (for
example, paper, textiles etc) or in a flammable environment. There
is a risk of fire occurring as a result of the heat generated during the
charging process.
• Fluid can escape from the battery when used incorrectly. Avoid all
contact with this. In the event of accidental contact, rinse with water.
If liquid should get into the eyes, get medical assistance. Battery fluid
may result in skin irritations and burns.
9
22/10/13 4:39:56 PM

Advertisement

Table of Contents
loading

Table of Contents