CONteNtS Warranty Power Tools Warranty For full details please visit us at www.909.com Description of symbols Specifications General safety rules Additional safety instructions for drills Additional safety instructions for the charger Additional safety instructions related to the battery pack and battery safety...
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and Read these operating instructions well before dependability have been given top priority in the...
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of electric shock. Failure to follow the warnings and instructions may result in 3) Personal safety electric shock, fire and/or serious injury.
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Battery tool use and care do the job better and safer at the rate for which it was a) Ensure the switch is in the off position before...
Additional safety instructions for the charger • Support the work properly. • Your 909 tool with Lithium Ion batteries may only • If you are interrupted when operating the drill, complete be charged with the specific designed 909 Lithium the process and switch off before looking up.
Page 8
• Do not place any object on to, or allow anything to rest • Do not plug anything other than your 909 tool into the on the charger. charger, as other objects may touch dangerous voltage •...
Unpacking Due to modern mass production techniques, it is unlikely that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified.
Know your product This drill is mainly used for drilling in wood or metal sheet and screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out. 1. Keyless chuck 2. Torque adjustment / drill selection 3.
automatically stop operating. To correct the situation you Important information – Product care need to either insert another charged battery into the drill This drill/driver uses lithium ion battery cells. Care or recharge the existing battery, and then proceed with the MUST be taken to ensure both the safety and life of the drilling/driving application.
The red light on the base indicates that there is power to Battery charging the charger base. This red light is a power indicator and IMPORTANT. Before attempting to charge the battery, will glow whenever power is supplied to the base. check the charger, the charger base and the battery 3.
For drilling, always use the Using the drill Drill position by aligning the Trigger switch Drill symbol with the triangular Use the forward/reverse switch indicator on the front face of the (4) to select the direction of drill near the torque collar. rotation, then pull the trigger For setting the torque position, (3).
To select the HIGH gear (high again, the drill will restart. Resume work after the overload speed, low torque setting), push has been reset, but reduce the load by using a smaller drill the gear selector (9) forward, bit or re-sharpen the existing drill bit and reduce the amount towards the chuck.
Note: Attempting to restart the tool without either recharging Chuck replacement the battery or installing another battery (with charge) will The chucks of reversible drills are always fixed by a screw lead to the drill restarting and then stopping again after only with a left-hand thread.