Related Manuals for 909 CD18 series
Summary of Contents for 909 CD18 series
- Page 1 INSTRUCTION MANUAL CD18, CD24 series H18, H24 series 18V – 24V L I T HIUM H A MMER DRIL L & DRIL L / DRI V ER 2 g e ar li t hium se r ie s: h amme r dr ill & dr ill dr i ve r...
-
Page 2: Table Of Contents
CONTENTS Warranty Power Tools Warranty For full details please visit us at www.909.com Description of symbols Specifications General safety rules Additional safety instructions for drills Additional safety instructions for the charger Additional safety instructions related to the battery pack and battery safety... -
Page 3: Description Of Symbols
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and Read these operating instructions well before dependability have been given top priority in the... -
Page 4: Specifications
Specifications 18V Drill/driver 18V Hammer drill 24V Drill/driver 24V Hammer drill Charger: 230 – 240V ~ 50Hz 230 – 240V ~ 50Hz 230 – 240V ~ 50Hz 230 – 240V ~ 50Hz Batteries: Std pack 1.3Ah Std pack 1.3Ah Std pack 1.3Ah Std pack 1.3Ah Fast Charging Time*: Approx 45 min... -
Page 5: General Safety Rules
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of electric shock. Failure to follow the warnings and instructions may result in 3) Personal safety electric shock, fire and/or serious injury. -
Page 6: Additional Safety Instructions For Drills
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. 5) Battery tool use and care The correct power tool will do the job better and safer at the rate for which it was a) Ensure the switch is in the off position before... -
Page 7: Additional Safety Instructions For The Charger
Additional safety instructions for the charger • Support the work properly. • Your 909 tool with Lithium Ion batteries may only • If you are interrupted when operating the drill, complete be charged with the specific designed 909 Lithium the process and switch off before looking up. - Page 8 • Do not place any object on to, or allow anything to rest • Do not plug anything other than your 909 tool into the on the charger. charger, as other objects may touch dangerous voltage •...
-
Page 9: Additional Safety Instructions Related To The Battery Pack And Battery Safety
• Do not dispose of the battery in a fire or put the battery • Use only the 909 batteries supplied with the 909 Tool or into a microwave oven, conventional oven, dryer, or high- 909-approved replacements. pressure container. -
Page 10: When To Charge The Battery
Unpacking Due to modern mass production techniques, it is unlikely that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. -
Page 11: Know Your Product
Know your product This drill is mainly used for drilling in wood or metal sheet and screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out. 1. Keyless chuck 2. Torque adjustment / drill selection / hammer selection 3. -
Page 12: Important Information - Product Care
automatically stop operating. To correct the situation you Important information – Product care need to either insert another charged battery into the drill This drill/driver uses lithium ion battery cells. Care or recharge the existing battery, and then proceed with the MUST be taken to ensure both the safety and life of the drilling/driving application. -
Page 13: Battery Charging
The green light on the right Battery charging hand side of the base indicates IMPORTANT. Before attempting to charge the battery, that there is power to the check the charger, the charger base and the battery charger base. to ensure the charging equipment matches the battery 3. -
Page 14: Battery Indicator Under No-Load
Battery Indicator Under No-load Yellow Green Battery status indicator/description High: Battery is fully charged Medium: Battery has less than 50% charge capacity. Low: Battery has less than 30% charge capacity. Faulty battery pack High temperature. The battery pack temperature is too high and needs to be cooled down. -
Page 15: Using The Drill
For drilling, always use the Drill position by aligning the Drill Using the drill symbol with the triangular indicator on the front face of the Trigger switch drill near the torque collar. Use the forward/reverse switch For setting the torque position, select a low setting on (4) to select the direction of the torque collar and align the selected symbol with the rotation, then pull the trigger... -
Page 16: Speed Gearbox
2 Speed gearbox Inserting and removing bits The 2 Speed Gearbox allows you This drill has a keyless chuck, which means that a chuck to select a gear with the optimum key is not needed to secure a bit in the drill. speed and torque to suit the Open the chuck by unscrewing it in an anti-clockwise application. -
Page 17: Drill Safety Features
Drill safety features Low voltage cut out The battery pack used on this tool is fitted with a low Drill Overload voltage cut out feature within the circuitry. This drill is fitted with an overload protection. If the drill is The low voltage cut out feature operates when the voltage excessively forced, or the task being performed is too great drops below a pre-set value. -
Page 18: Drilling
Drilling Chuck replacement Drilling metals The chucks of reversible drills are always fixed by a screw with a left-hand thread. The screw, which is located in the • Always clamp sheet metal. centre of the chuck, must be removed before the chuck can •...