Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for 909 HD1050
Summary of Contents for 909 HD1050
- Page 1 INSTRUCTION MANUAL HD1050 HD850 HIGH PERFORM A NCE H A MMER AC T ION DRIL L...
-
Page 2: Table Of Contents
CONTENTS Warranty Warranty Power Tools Introduction For full details please visit us at www.909.com Environmental protection Description of symbols Specifications General safety rules Additional safety rules for drills Unpacking Know your product Auxiliary handle and depth gauge Inserting and removing bits... -
Page 3: Environmental Protection
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the Read these instructions for use carefully. -
Page 4: General Safety Rules
General safety rules f) To reduce the risk of electric shock, the manufacturer recommends the use of a residual current device WARNING. Read all safety warnings and all instructions. with a rated residual current of 30mA or less at Failure to follow the warnings and instructions may result in all times. -
Page 5: Additional Safety Rules For Drills
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. 5) Service The correct power tool will do the job better and safer at the rate for which it was a) Have your power tool serviced by a qualified repair designed. -
Page 6: Unpacking
Due to modern mass production techniques, it is unlikely the motor. that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the The tool must be used only for its prescribed purpose. -
Page 7: Know Your Product
Know your product 1. 13mm Keyless chuck 2. Over-moulded auxiliary handle 3. Depth gauge 4. Drilling/hammer mode selector 5. Lock-on button 6. Forward/Reverse switch 7. Variable speed trigger switch 8. Speed dial 9. Metal gear box cover 10. Gear selector... -
Page 8: Auxiliary Handle And Depth Gauge
Auxiliary handle and depth gauge Inserting and removing bits 1. Turn the auxiliary handle (2) anti-clockwise to loosen the CAUTION. Always ensure that the drill is switched off collar and slip it over the chuck onto the drill. and the plug is removed from the power point before making any adjustments. -
Page 9: Operation
Operation Reversing the direction of rotation Starting and stopping 1. The forward/reverse switch (6) Operational controls protrudes from one side of the 1. Ensure that the tool is in drill to the other. good condition. 2. The arrow head symbol on each 2. -
Page 10: Gear Selector
Gear selector Chuck replacement The gear selector (10) allows you to shift gears for greater Always wear eye protection. versatility of operation. Chuck removal 1. To select the low speed, high The chucks of reversible drills are always fixed by a screw torque setting (Position 1), turn with left-hand thread. -
Page 11: Hints For Use
Hints for use Wood drilling Note. When drilling into masonry the drilling rate is fast • For maximum performance, use high speed steel bits for and burnout of the tip will occur if the drill bit is not wood drilling. constantly cleared. -
Page 12: Cleaning
Masonry drilling • For maximum performance use tungsten carbide-tipped masonry impact bits when drilling holes in brick, tile, concrete, etc. • Move drilling/hammer mode selector to hammer mode . • Apply light pressure and medium speed for best results in brick. •...