Related Manuals for 909 H144L1
Summary of Contents for 909 H144L1
- Page 1 INSTRUCTION MANUAL H144L1 14.4V SDS PLUS PNEUM AT IC AC T ION VA RI A BL E SPEED H A MMER DRIL L DRI V ER...
-
Page 2: Table Of Contents
CONTENTS Warranty Power Tools Warranty For full details please visit us at www.909.com Description of symbols Specifications General safety rules Additional safety instructions for drills Additional safety instructions for the charger Additional safety instructions related to the battery pack and battery safety... -
Page 3: Specifications
Conforms to relevant standards special care to heed the Cautions and Warnings. for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and Read these operating instructions well before dependability have been given top priority in the... -
Page 4: General Safety Rules
General safety rules e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord WARNING. Read all safety warnings and all instructions. suitable for outdoor use reduces the risk of electric shock. Failure to follow the warnings and instructions may result in 3) Personal safety electric shock, fire and/or serious injury. -
Page 5: Additional Safety Instructions For Drills
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. 5) Battery tool use and care The correct power tool will do the job better and safer at the rate for which it was a) Ensure the switch is in the off position before... -
Page 6: Additional Safety Instructions For The Charger
Rags, cloths, cord, string and the like should never be left Additional safety instructions for the charger around the work area. • Your 909 tool with Lithium-Ion batteries may only be • Support the work properly. charged with the specifically designed 909 Lithium- •... - Page 7 • Do not place any object on to, or allow anything to rest • Do not plug anything other than your 909 tool into the on the charger. charger, as other objects may touch dangerous voltage •...
-
Page 8: Additional Safety Instructions Related To The Battery Pack And Battery Safety
• Use only the 909 batteries supplied with the 909 tool or • Do not dispose of the battery in a fire or put the battery 909-approved replacements. -
Page 9: When To Charge The Battery
Unpacking Due to modern mass production techniques, it is unlikely that your 909 power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. -
Page 10: Know Your Product
Know your product This drill is specifically designed for hammer drilling into concrete or similar type material. Addition features also allow the drill to be used for drilling timber or metal plus small screwdriving tasks. Use the tool and accessories for intended applications only. -
Page 11: Important Information - Product Care
Important information – product care Another feature of the drill/battery pack is the low voltage cut out feature. This feature operates when the voltage This drill/driver uses Lithium-Ion battery cells. Care drops below a pre-set value. When this occurs the tool MUST be taken to ensure both the safety and life of the will automatically stop operating. -
Page 12: Battery Charging
charger base adaptor will indicate that power is available Battery charging to charge the battery. IMPORTANT. Before attempting to charge the battery, The green light on the charger base adaptor will NOT check the plug pack, the charger base adaptor and the illuminate during the charging process, so if the green battery to ensure the charging equipment matches the light is on the battery is not charging. -
Page 13: Using The Drill
Avoid charging or storing your battery in temperatures Rotate the selector to the down position marked below 0ºC and above 40ºC. wood and steel drilling. This position should also be used for screw driving. Using the drill Pneumatic hammer drilling Trigger switch Hammer drilling is the prime function of this drill. -
Page 14: Inserting And Removing Accessories
Note. The bit will move in and outward in the chuck, but outlets and tool specialists. (Not should not fully detach. supplied with the H144L1) To remove the accessory, slide Note. Do not use a 3-jaw chuck in hammer mode. -
Page 15: Drill Safety Features
(Note: Driver bits are not supplied with the If the drill is constantly overloaded, or the drill is used H144L1 kit) constantly at maximum rating in high ambient conditions, When applying or removing screws, always wear safety the battery cells may overheat, causing the battery pack glasses. -
Page 16: Drilling
Low voltage cut out FOR: USE: Steel The battery pack used on this tool is fitted with a low voltage Aluminium Turpentine or paraffin cut out feature within the circuitry. Brass, copper or cast iron Do not lubricate The low voltage cut out feature operates when the voltage drops below a pre-set value.