Placing Your Printer - Dascom T2150 Quick Start Manual

Installation

Placing your printer

Place the printer on a solid, flat and non-slip surface in such a way that it cannot fall down. Make
sure to facilitate access to the control panel and the paper input trays and to leave sufficient space
for the paper ejected.
When selecting the printer location, observe the following additional instructions:
Never place the printer in the vicinity of easily inflammable gas or explosive substances.
STOP
Do not expose the printer to direct sunlight. If you cannot avoid placing the printer near a win-
dow, protect it from the sunlight with a curtain.
When connecting the computer with the printer, make sure not to exceed the permitted cable
length (see User Guide on the online CD-ROM, Technical specifications).
Ensure sufficient distance between the printer and any heating radiators.
Avoid exposing the printer to extreme temperature or air humidity fluctuations. Protect the
printer from dust.
It is recommended to install the printer in a place which is acoustically isolated from the
workplace because of the noise it may produce.
6
If you expect that frequent forward and reverse feeds will occur,
you should place the printer as shown in the figure, if possible.
Quick Start-up