TEST AND MEASUREMENT
GSM Tester
This unit acts as a base station providing all the necessary GSM signalling requirements and also provides GSM signal
measuring facilities.
Dummy Battery (Part No. JT00073)
The dummy battery is used for battery calibration.
10532-1
Figure 6.4: Dummy Battery
Channel Box Software
This is the test software for the telephone unit and should be installed onto the personal computer to be used for testing.
Case Separation Tool (Part No. JT00059)
The Case Separation Tool is used to facilitate separation of the front cover and case.
10473-1
Figure 6.5: Case Separation Tool
Issue B
Section 6
MCUK011201C8
Revision 0
– 32 –
Service Manual