DISASSEMBLY / REASSEMBLY INSTRUCTIONS
3.
Using a small screwdriver blade or similar instrument on one corner of the LCD (connector end), carefully lift the LCD from
its LCD Holder.
4.
The LCD connector strip ('Zebra strip') can be removed from the LCD Holder using a pair of tweezers.
4.2.3
Case-Mounted Components
1.
Remove the keypad by pressing on the navigation key until the membrane can be peeled away from the case front.
2.
Remove the microphone assembly by prising upward with a small pair of tweezers or similar blunt object through the slot
in the side of the microphone holder.
Issue B
Revision 0
Figure 4.7: Removing the LCD from its Holder
Figure 4.8: Keypad Membrane Removal
10539-1
Figure 4.9: Removal of Microphone
Section 4
– 22 –
10538-1
10508-1
MCUK011201C8
Service Manual